An oil leak is a common phenomenon in any parking lot. However, they don’t look pleasing and lots of homeowners in Sydney want to know how to clean oil spills on Garage Epoxy Floor before it’s too late. And that’s why we, at Ultimate Epoxy Flooring, decided to provide a manual showing how to clean a floor.

Tools and Chemicals You Need to Clean Oil Spills on Epoxy Garage Floor

Scrubbing is a major part of cleaning an Epoxy garage floor. So, nylon brushes are a must-have. However, if you want to have an arsenal to fight all sorts of stains, get this stuff as soon as possible:

  • Soft broom
  • Nylon brush
  • Hard foam mop (in case there will be heavy cleanup processes)
  • Soft Scrub
  • Simple Green
  • CLR cleaner
  • Ammonia
  • Any Lactic Acid-based solutions
  • Concrete degreaser

What Floor Cleaner Can Remove Tire Mark and Clean Oil Spills on Epoxy Garage Floor?

Do you know how to clean the painted floors? Well, cleaning tire marks on an Epoxy ground is somewhat like that. First, you need to cover the area with concrete degreaser—a heavy-duty chemical cleanser—and then you should scrub it after 10 minutes.

This would help you get rid of the oil spill in no time. But don’t forget to resin the area with water afterward and dry it immediately. Otherwise, the ground may become slippery and lead to hazardous situations.

In case you don’t like strong chemicals, apply some tide to the oily spot and then use some warm water to scrub it. This is a cheap method but you’ll need more power when it comes to old marks. So, if you want to keep things on a budget, try to clean the tire marks in the drop of a hat. If not, they’ll become stronger and refuse to leave!

Ammonia VS. Simple Green, Which One Suits an Epoxy Garage Floor?

In short, both substances are proper choices to remove unwanted oil or paint spots on an Epoxy Garage Floor. But since Simple Green products are risk-free and nontoxic, we recommend you to avoid using Ammoniac as much as possible.

Just apply a portion of Simple Green All-Purpose to the stained section and scrub it firmly using a long-handled nylon brush. Then, wash off the dirt and debris using warm water and dry the area as soon as possible.

Note: using Ammonia is not different and you follow the same instructions explained above.

When to Use a Lactic Acid-Based Cleaner on an Epoxy Garage Floor?

These products are best to use against rust stains and salt road film. All you need to do is applying 1 part of such a substance to 1 liter of warm water and scrub the dirty area using the created substance.

It would keep your garage base clean for a while and protect it against rust stains and salt road films. But bear in mind that you better wash the area with cold water after finishing the scrubbing off.

Contact Us for More Info

Our team is ready 24/7 to answer your questions and lend a helping hand with all sorts of Epoxy-related problems. So, feel free to contact us right away in case you’re experiencing some concerns over your garage ground.

Follow us on InstagramFacebookLinkedIn Twitter.

Call: 1800 693 769